Cisco Meraki MS350-24P

Liên hệ báo giá

Thiết bị chuyển mạch Switch Cisco Meraki MS350-24P-HW Stackable Layer-2 24 Ports Gigabit PoE+ 370W, 4 SFP+ Uplink, hot-swappable PS and fans, Cloud management.

chat Nhận báo giá sản phẩm?

Bạn đang yêu cầu tư báo giá sản phẩm Cisco Meraki MS350-24P

Thiết bị mạng switch Cisco Meraki MS350-24P được xây dựng để hoạt động ở layer 2 của mô hình mạng, cung cấp 24 cổng gigabit tốc độ cao hỗ trợ PoE+ 370W cùng 4 cổng uplink sử dụng module quang 10Gbps để kết nối. Thiết bị mạng Meraki MS350-24P sử dụng nguồn và quạt ở dạng module, cho phép có thể nâng cấp hoặc thay thế mà không cần phải tắt thiết bị.

Thiết bị mạng switch Cisco Meraki MS350-24P được xây dựng trên nền tảng đám mây để dễ dàng quản lý và cấu hình. Switch Meraki MS350-24P được quản lý thông qua giao diện đám mây trực quan, giúp cho quản trị viên có thể nhanh chóng cấu hình và quản lý mà không cần phải kết nối trực tiếp với switch. Giao diện quản lý tập trung, cho phép quản trị viên có thể theo dõi giám sát các event log, mô hình mạng…

Thông số kỹ thuật :

Interface	24 x 10/100/1000BASE-T Ethernet RJ45 with with auto negotiation and auto-MDIX3 4 x SFP+ 10G uplink 2 x stacking ports
Switching Capacity	128 Gbps
Stacking Bandwidth	160 Gbps
Forwarding rate	95.24 mpps
Jumbo frame support	9600 byte Ethernet frame
Physical Dimensions (H x W x D)	1.74” x 19.08” x 20.4” (4.44 x 48.46 x 51.81cm)
Weight	13.14 lb (5.96 kg)
Idle / Full (with Combined Power)	57 / 466 W
Redundant / Combined Power	740 / 1440 W
Power Supply Configuration	Hot-swappable
Supported Power Supply	MA-PWR-640WAC
Power over Ethernet	802.3af (PoE) 15.4 W per port 802.3at (PoE+) 25.5 W per port Maximum PoE output: 370 W PoE available simultaneously on all ports Intelligent PoE power allocation based on device advertisement (LLDP)
Management	Managed via the Web with the Meraki cloud management platform Integrated with Meraki wireless, security appliance, and device management Zero-touch remote provisioning (no staging needed) Detailed historical per-port and per-client usage statistics DHCP, client, and hostname fingerprinting SNMPD allows integration with third party network management solutions Automatic firmware upgrades
Remote Diagnostics	Email, SMS and Mobile push notification alerts Ping, traceroute, cable testing, and link failure detection with alerting Remote packet capture Dynamic and interactive network discovery and topology Combined event and configuration change logs with instant search
Scalable Stacking	Physically stack up to 8 switches with 160 Gbps of stacking bandwidth on all models Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration
Ethernet Switching Capabilities	802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping) 802.1Q VLAN and trunking support for up to 4,094 VLANs 802.1w, 802.1D Rapid Spanning Tree Protocol (RSTP, STP) STP Enhancements: BPDU guard, Root guard, Loop guard, UDLD Broadcast storm control 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP) 802.3ad Link aggregation with up to 8 ports per aggregate, Multichassis aggregates supported on stacked switches Port mirroring IGMP snooping for multicast filtering MAC forwarding entries: 96K
Security	Integrated multi-factor authentication for Dashboard management Role-based access control (RBAC) with granular device and configuration control Corporate wide password policy enforcement IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing Single-Host/Multi-Domain/Multi-Host/Multi Authentication Port security: Sticky MAC, MAC whitelisting DHCP snooping, detection and blocking, Dynamic ARP Inspection IPv4 and IPv6 ACLs
Performance	Non-blocking fabric 2.5 microsecond latency Jumbo frame support (9600 byte Ethernet frame)
Layer 3	Static routing, OSFPv2 (with support for up to 16 ECMP Routes) Multicast routing [PIM-ASM] Warm Spare (VRRP) DHCP Server, DHCP Relay
Power	Power input: 100 – 240 VAC, 47-63 Hz Power consumption: 5-888W
Mounting	1U rack-mountable with included rack mount hardware 2-post front mounting options available
Environment	Operating temperature: -5°C to 50°C Humidity: 5 to 95% non-condensing Variable speed fans
Regulatory	CSA (US) IC (Canada) CE (Europe) C-Tick (Australia/New Zealand) RoHS
MTBF Rating	568,000