Một số tính năng nổi bật Cambium X7-35X
Cambium X7-35X Access Point này có tổng tốc độ dữ liệu lên đến 9,2 Gbps, hỗ trợ tải xuống siêu nhanh, streaming mượt mà và trải nghiệm không giật lag. Các tính năng bao gồm LMLO 4096-QAM, kênh rộng 320 MHz và 16 luồng không gian2
Ngoài ra, X7-35X còn sử dụng hệ thống quản lý mạng cnMaestro của Cambium, có thể truy cập từ cả môi trường đám mây và on-premises. Điều này giúp bạn quản lý tất cả các thiết bị một cách dễ dàng thông qua giao diện thân thiện, từ backhaul đến các thiết bị ở cạnh mạng
Với khả năng cài đặt nhanh chóng và hệ thống gắn trên nhiều loại hộp điện và trần nhà, X7-35X là giải pháp không thể bỏ qua cho mạng Wi-Fi của bạn
| X7-35X AP Quick Look * Tri-radio/tri-band Wi-Fi 7 * 6 GHz (2×2), 5 GHz (2×2), 2.4 GHz (2×2) * 9.2 Gbps aggregate data rate * 2.5 GbE uplink port * LPI (low power indoor) mode * BLE/Zigbee®/Thread/Matter IOT radio * Managed by cnMaestro™ * Limited lifetime warranty |
FEATURES
| Access Point Specs | |
| Radios | 2.4 GHz 2×2:2 with 802.11 b/g/n/ax/be 5 GHz 2×2:2 with 802.11 a/n/ac/ax/be 6 GHz 2×2:2 with 802.11 ax/be |
| BLE and Zigbee | Built-in BLE or 802.15.4 radio Max Transmit power 20 dBm with the integrated 5 dBi omnidirectional antenna gain Matter and thread support |
| Supported data rates | 802.11be: 7.3 to 5765 Mbps 802.11ax: 7.3 to 2402 Mbps 802.11ac: 6.5 to 1733 Mbps 802.11n: 6.5 to 300 Mbps 802.11a/g and a: 6 to 54 Mbps 802.11b: 1 to 11 Mbps |
| Network Specs | |
| Security & Authentication | Open, WPA, WPA2-PSK AES WPA2-ePSK / WPA2-Enterprise WPA3-PSK (WPA3-SAE) / ePSK / Enterprise / Enterprise-CNSA / OWE (Enhanced Open) OSEN and PMF (802.11 W) MAC authentication with local database or external database using RADIUS protocol EAP-TLS / TTLS / PEAP / SIM / AKA Hotspot WEB authentication, Hotspot 3.0 |
| SSID | 16 SSIDs per radio, 48 SSIDs per AP SSID scheduling |
| Client Capacity | 256 clients per radio, 768 clients per AP Max client connections limit per SSID / radio / device |
Specifications:
| Access Point Specifications | ||
| Radios | 2.4 GHz 2×2:2 with 802.11 b/g/n/ax/be 5 GHz 2×2:2 with 802.11 a/n/ac/ax/be 6 GHz 2×2:2 with 802.11 ax/be |
|
| BLE and Zigbee | Built-in BLE or 802.15.4 radio Max Transmit power 20 dBm with the integrated 5 dBi omnidirectional antenna gain *Matter and Thread support (*Will be supported in future releases) |
|
| Supported data rates |
802.11be: 7.3 to 5765 Mbps 802.11ax: 7.3 to 2402 Mbps 802.11ac: 6.5 to 1733 Mbps 802.11n: 6.5 to 300 Mbps 802.11a/g and a: 6 to 54 Mbps 802.11b: 1 to 11 Mbps |
|
| Max PHY Rate | 2.4 GHz: 574 Mbps 5 GHz: 2882 Mbps 6 GHz: 5765 Mbps |
|
| Antenna | Omnidirectional internal antennas (Peak gain) 2.4 GHz: 5 dBi 5 GHz: 6 dBi 6 GHz: 6 dBi BLE and Zigbee: 5 dBi |
|
| Maximum Radio Tx Power* (combined Tx power across all Tx chains) |
2.4 GHz: 24 dBm, max EIRP: 29 dBm 5 GHz: 25 dBm, max EIRP: 31 dBm 6 GHz: 25 dBm, max EIRP: 31 dBm |
|
| MIMO Support | 2×2 (2.4 GHz, 5 GHz, and 6 GHz) SU-MIMO 2×2 (2.4 GHz, 5 GHz, and 6 GHz) MU-MIMO both in UL and DL direction |
|
| USB Interface | 1 USB 2.0 type A port, max 1.5 W power supply | |
| Ethernet Interface | 1 100 Mbps/ 1 Gbps / 2.5 Gbps PoE port | |
| Power | Max power consumption 25.5W (802.3at) Typical power consumption with BLE / 802.15.4 radio enabled: 10.6W LLDP power negotiation support |
|
| Dimensions | 209.6 mm x 209.6 mm x 45 mm 8.25 in x 8.25 in x 1.77 in |
|
| Weight | Weight: 935 gm (2.06 lb) | |
| Mount Options | Drop ceiling T-bar, ceiling tile, 4″ square electrical box, 4″ round box, NA single gang box, EU single gang box, wall mount |
|
| Physical Security | Kensington lock slot | |
| LEDs | Multicolor status LED Blue: Managed from cnMaestro Green: Up and running, not managed from cnMaestro Amber: Booting |
|
| Ambient Operation Temperature |
0ºC – + 50ºC | |
| Storage Temperature | -20ºC – + 70ºC | |
| Operating Humidity | 95% RH non-condensing | |
| Reliability | MTBF 8,29,316 hours at +25ºC operating temperature | |
| Device Management |
cnMaestro Cloud / On-Premises management (version 5.1 and above) Standalone operation mode Web access with HTTPs / HTTP protocol CLI access with SSH / telnet protocols |
|
| Certifications (Compliance) |
FCC, IC, CE E 60601-1-2 EN 60950-1 IEC 62368-1 Safety EN 60601-1-2 Medical EMC EN 61000-4-2/3/5 Immunity UL 2043 Plenum |
EN 62311 Human Safety/RF Exposure WEEE REACH and RoHS *Wi-Fi certified a, b, g, n, ac, ax, be; WMM; spectrum and regulatory; Wi-Fi agile multiband; PMF; WAP2 and WPA3 PSK personal and enterprise *Will be supported in future releases |
| Network Specifications | ||
| Security & Authentication |
Open, WPA, WPA2-PSK AES WPA2-ePSK / WPA2-Enterprise WPA3-PSK (WPA3-SAE) / WPA3-ePSK / Enterprise / Enterprise-CNSA / OWE (Enhanced Open) OSEN and PMF (802.11 W) MAC authentication with local database or external database using RADIUS protocol EAP-TLS / TTLS / PEAP / SIM / AKA Hotspot WEB authentication |
|
| Fast Roaming Support |
PMK, OKC, and 802.11r for fast layer 2 roaming Seamless L2 roaming for wireless and guest clients across APs in the same L2 network cnMaestro-assisted roaming for the guest clients |
|
| Wi-Fi Quality of Service |
WMM (packet marking either with 802.1p or IP DSCP), WMM-PS, U-APSD Multicast to unicast conversion |
|
| MESH Support | Auto-discovery and self-healing Wireless MESH support on 2.4 GHz, 5 GHz, and 6 GHz band MESH and Client SSIDs can co-exist on the same radio interface |
|
| SSID | 16 SSIDs per radio, 48 SSIDs per AP SSID scheduling |
|
| Client Capacity | 256 clients per radio, 768 clients per AP Max client connections limit per SSID / radio / device |
|
| Band Steering | Yes | |
| Sticky Client Management |
Option to disconnect the client on minimum SNR threshold | |
| Rate Limit | Per SSID / MAC | |
| Dynamic RF Channel and Power Management |
Auto-Channel selection Auto-RF dynamic channel switch based on channel utilization and Wi-Fi / non-Wi-Fi interferences Auto-RF dynamic power adjustment with the neighboring APs transmit power |
|
| WIDS and WIPS | Wireless packets flood (excessive association, authentication, de-authentication, disassociation, and EAP) detection Rogue AP, Honeypot AP detection and termination |
|
| Wireless Users Policy Management |
Standard Radius, Accounting, WISPr, and Cambium VSA attributes support COA Messages (disconnect, VLAN ID, session, etc.) support User groups with RADIUS assigned filter rules |
|
| Wireless Devices Policy Management |
Device grouping based on device fingerprinting with L2, L3, L4, and L7 access control rules | |
| Network Specifications, continued | ||
| Radius and Accounting Support |
Per SSID based RADIUS and accounting server Accounting interval with start, stop, and interim messages with standard / Cambium VSA accounting attributes Up to 3 RADIUS and accounting server with failover and load balancing option Dynamic authorization and disconnect using COA messages |
|
| VLAN Assignment | Per SSID based 802.1q VLAN tagging Dynamic VLAN assignment from external RADIUS server Local VLAN pool Radius assigned VLAN pool ePSK assigned VLAN ID |
|
| ACL and Application Control Rules |
Per SSID or device level, layer 2, 3 (IPv4 and IPv6), 4 and 7 access control rules with packet marking option Application recognition, packet marking, rate limiting, and option to drop and deny application / application category Per SSID DNS ACL option Define custom application based on IP address and monitor/control custom application traffic |
|
| Connection Logging |
Per SSID basis option to log TCP, UDP and IP connection, and DNS query NAT logging to external syslog servers |
|
| IP Support | IPv4 and IPv6 | |
| Tunneling Protocols | WWAN, PPPoE, L2TPv2, L2GRE, & *VXLAN (*Will be supported in future releases) | |
| SNMP and Syslogs Support |
SNMP v2 and v3 get operational mode Syslog messages to external syslog server |
|
| DHCP Client and Server |
Option to enable DHCP client on L3 VLAN interface On-board DHCP server with multiple DHCP pool options |
|
| Analytics and location Service |
Option to integrate Wi-Fi and BLE radios scan results with an external location analytics server through HTTP/HTTPs post |
|
| Client Connection and Life Cycle Analytics (available with cnMaestro X Cloud) |
Exhaustive client life cycle analytics with root cause analysis Connection success and failure analytics |
Disconnection analytics Client dashboard with roaming history |
| Guest Access Service (EasyPass) (X Features are available on cnMaestro X) |
cnMaestro hosted captive portal service Multiple authentication methods supported to on-board guest user • Radius based authentication • Click through with simple terms and conditions acceptance • Social login using Google®, Facebook®, Twitter® (aka, X), and Office 365® • SMS based authentication (X) • Voucher based access • Microsoft® Azure AD and Google Workspace® (X) • Sponsored guest access (X) • Self-registration access (X) |
Guest access on-boarding using payment gateway vendors (X) • PayPal® • IPpay • Quickpay • Orange • Orange MoneySM • mPesa Integration with the third-party captive portal vendors appliance On-board captive portal service IP whitelist or walled garden list support Option to limit guest users’ session, data quota limit, speed limits supported using Radius, WISPr, Cambium VSA and cnMaestro-hosted guest portal policy |
| Services | L2–L7 appl | |
